MIDEA XTREME SAVE 2.7 kW (with installation)

Midea air conditioners have many practical functions:

Precision control algorithm for energy saving, active energy control and highly efficient Quattro inverter technology

Built-in Wi-Fi control

The unit is equipped with Wi-Fi control and can be operated with the Midea Air mobile application.

Automatic sleep mode

In Sleep mode, the unit continuously adjusts its output to the required minimum, providing night-time comfort, optimal consumption and the lowest possible noise level.

Compressor crankcase and drain pan heating

At low outdoor temperatures, the compressor in the outdoor unit must be kept warm so that the air conditioner can operate efficiently in heating mode and the compressor service life is increased. In heating mode, drain pan heating prevents condensate from collecting unnecessarily and freezing in very cold weather. These features make the unit suitable for heating down to -30°C.

Turbo level

The unit runs at maximum output for 30 minutes in cooling and, if needed, heating mode to achieve an immediately noticeable temperature change.

Two-way pipe connection

The condensate connection and drain can be installed on either side of the indoor unit drain pan, supporting quick and easy installation.

Gear shift and ECO mode

Midea air conditioners distinguish three output levels: 50%, 75% and 100%. For energy efficiency, the unit always operates at the required optimal level. During cooling, it reduces its own output by 25/50/70%.

Four-way indoor airflow, 12 indoor fan speeds and 5 outdoor fan speeds

The indoor unit can direct air automatically in four directions, up/down and left/right, for even distribution. The fan speed of both the indoor and outdoor units can be adjusted over a wide range.

Automatic restart and louvre memory

After a power failure, the unit switches on automatically and continues cooling or heating using the preset parameters. After each restart, the louvres stop in the preset position.

8°C tempering heat

Automatic 8°C tempering prevents water systems from freezing and helps prevent possible damage to the building structure in winter when it is not in use.

Automatic outdoor self-cleaning

The outdoor unit can reverse the fan rotation direction and automatically blow away much of the dust deposited on the heat exchanger.

Intelligent Eye and Follow Me function for greater comfort

The unit detects human activity in the room and directs the airflow away from the person. In cooling mode, after 30 minutes of absence it automatically reduces frequency and output to save energy.

Golden Fin heat exchanger coating

Special corrosion-resistant protection.

Low refrigerant and refrigerant leak detection

In the event of a refrigerant leak, the unit performs immediate fault diagnosis and displays the EC error code.

Pi-shaped mounting plate

Installer-friendly mounting plate designed for faster, professional commissioning.

Timer function

24-hour timer for switching the unit on and off.

• Automatic restart
• Louvre memory
• 1W standby mode
• Four-way airflow
• Turbo mode
• Automatic sleep function
• Follow Me function
• Emergency mode
• 8°C tempering heat
• Timer function
• 5 outdoor fan speeds
• Golden Fin
• Gentle airflow function
• R32 refrigerant
• Drain pan heating
• Built-in Wi-Fi control
• Refrigerant leak detection
• Crankcase heating
• ECO mode (25%)
• π-shaped mounting plate
• Two-way pipe connection
• Optional multi-function board
• UV light disinfection